We have exciting news for our Acrylic Spa owners! We now offer a Bluetooth module that can easily be installed on your Canadian Spa Company Hot Tub or Swim Spa. With this simple add-on, you can enjoy wireless music while relaxing anywhere in your spa.
Continue reading for our step-by-step instructions on how to easily install the Bluetooth Module on your Spa.
*UPDATE: All Canadian Spa Company acrylic spas from 2019 onwards that have speakers come with built-in Bluetooth.
Remove the center and right cabinet panel on the Control side of your Spa.
Locate the amp power connector.
Unplug amp from transformer.
Connect DC/DC Connector to amp and transformer. After all the wires have been connected they must be secured to the other group of cables or vertical supports around the amplifier unit using a zip tie or electrical tape. *Note: This ensures that the cables do not disconnect or become loose with usage.
Remove audio cable from panel.
Fit USB wire of DC/DC Connector through hole in audio panel. *Note: you may need to enlarge this hole depending on which Spa model you own.
Fit audio auxiliary end of Audio Stabilizer through hole in audio panel.
Connect Audio Stabilizer to audio cable.
Re-attach Spa's cabinet panels.
Plug Bluetooth Module into USB.
Plug Audio Stabilizer into Bluetooth Module.
Connect device to Bluetooth (connect to H163) and enjoy your favorite music! You can still use the auxiliary cable to connect to your device when Bluetooth is not in use.
TIP: When Bluetooth is not in use, you can disconnect Bluetooth module from USB port and use USB port to charge your phone.